Morgan Bearing Oils |
HP FILM OIL grades are highly refined mineral oils exclusively developed for application in oil film bearings of steel plants. These oils are blended from solvent extracted, high viscosity index base stocks.
HP FILM OIL grades are recommended for use in antifriction bearings, drive gear and pinion of steel mills where operating conditions are moderate. They are also suitable for use in circulation systems where oils with high demulsibility characteristics are required.
HP FILM OIL 150, 220 grades are approved by TISCO, JAMSHEDPUR
| PROPERTIES | 32 | 46 | 68 | 100 | 150 | 220 | 320 | 460 |
|---|---|---|---|---|---|---|---|---|
| VISCOSITY, cSt @ 40°C | 29-34 | 42-50 | 62-74 | 90-110 | 140-160 | 200-240 | 300-340 | 420-500 |
| VISCOSITY INDEX, MIN | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 |
| FLASH POINT, COC, °C, MIN | 190 | 190 | 190 | 190 | 190 | 200 | 220 | 240 |
| POUR POINT, °C MAX | (-)6 | (-)6 | (-)6 | (-)6 | (-)6 | (-)6 | -6 | -6 |
| TAN, mg KOH/g, MAX | 0.1 | 0.1 | 0.1 | 0.1 | 0.15 | 0.2 | 0.2 | 0.2 |
| DEMULSIBILITY IN 20 MIN.ML | 40-37-3 (AT 54°C) | 40-37-3 (AT 54°C) | 40-37-3 (AT 82°C) | 40-37-3 (AT 82°C) | 40-37-3 (AT 82°C) | 40-37-3 (AT 82°C) | 40-37-3 (AT 82°C) | 40-37-3 (AT 82°C) |
© 2016. All rights reserved.