Wire Rope Lubricants |
Wire rope lubricants provides two important functions, namely:
Wire rope lubricants are of two types: bitumen based and non-bitumen based.
RODEC 120 is a bitumen based wire rope lubricant. It offers good protection of the strands and at the same time has balanced ductility over normal temperature range.
It is applied by HOT DIP method. RODEC 120 has been recommended for use by M/s USHA MARTIN.
| CHARACTERISTICS | TYPICAL TEST RESULTS |
|---|---|
| Appearance | Black |
| Flash Point, °C | >250 |
| Drop Point, °C | 84 |
| Softening Point, °C | 65 |
| Breaking Point, °C | -30 |
| Penetration (Needle), 1/10 mm @25 °C | 20-25 |
| Content of water soluble corrosive acids | Free from water soluble corrosive acids |
| Processing temperature | 110-130 |
| Salt spray test, hrs. Pass | 720 hrs. |
© 2016. All rights reserved.